Nit za 3D printer, SILK 1,75mm, zlatna,1kg, Devil Design


  large-image
Nit za 3D printer, SILK 1,75mm, zlatna,1kg, Devil Design
Kliknite na sliku za povećanje
thumb
Proizvođač: Devil design
Šifra: 1353378
Kataloški broj: SILK 1,75 GOLD
Jamstvo: Nema
Raspoloživost: Dobavljivo (Dobavljivo)
Prosječna ocjena: Ocjena 0 0,00 | Glasova: 0
  Ocijeni ovaj proizvod

26,70 €

Načini plaćanja online

Popust 10%
26,70 €
 
Transakcijski račun
Popust 9%
27,00 €
 
Kriptovalute
Popust 8%
27,29 €
 
Maestro, MasterCard, Visa
Popust 6%
27,89 €
 
Union, PBZ Maestro/Visa Inspire 2-6 rata
Popust 5%
28,18 €
 
Diners, ZABA Master/Visa 2-6 rata, ERSTE Master/Visa/Maestro 2-6 rata
Popust 4%
28,48 €
 
Diners 2-12 rata, PBZ Visa Inspire/Maestro 7-12 rata, PBZ Visa Premium 2-6 rata
Popust 3%
28,78 €
 
ZABA Master/Visa 7-12 rata
Popust 2%
29,07 €
 
ERSTE Master/Visa/Maestro 2-6 rata, PBZ Visa Premium 7-12 rata
Popust se ne obračunava
29,67 €
 
ZABA Master/Visa 13-24 rate, Diners 13-24 rate

Načini plaćanja u trgovini

Popust 10%
26,70 €
 
Novčanice, Transakcijski račun
Popust 9%
27,00 €
 
Maestro, MasterCard, Visa
Popust 7%
27,59 €
 
PBZ Maestro/Visa Inspire 2-6 rata
Popust 6%
27,89 €
 
RBA Master/Visa 2-12 rata
Popust 5%
28,18 €
 
Diners, ZABA kartice 2-6 rata, Diners 2-6 rata, ERSTE Maestro/Visa/Master 2-8 rata, PBZ Maestro/Visa Inspire 7-12 rata
Popust 4%
28,48 €
 
ZABA Master/Visa 7-12 rata, Diners 7-12 rata, PBZ Visa Premium 2-6 rata
Popust 3%
28,78 €
 
ERSTE Maestro/Visa/Master 9-12 rata
Popust 2%
29,07 €
 
Diners 13-24 rate, PBZ Visa Premium 7-12 rata
Popust se ne obračunava
29,67 €
 
ZABA Maestro/Visa 7-12 rata, ZABA Visa 13-24 rate, ZABA Master 13-36 rata, Diners 25-36 rata

*MBNET kartice (Maestro, Visa, Mastercard) kojima je moguće plaćanje na rate izdane od Slatinske banke, Istarske kreditne banke, Sberbanke, KentBank i Agram banke
**kod nonSEPA transakcija naplaćujemo naknadu banke

već od 0,82 €/mjesečno

Odabrali ste prikaz cijena za gotovinsko plaćanje - prikaži MPC



SILK filament za 3D printere

Product description:
SILK filament – a thermoplastic material in the form of fiber, used for 3D-printing using the FFF method.
Filament wound on a spool, vacuum packed with a moisture absorber.
The spool contains 1kg of net material.
It can be used in all FFF printers that are not protected from external suppliers and open source structures before using.
SILK is mix of PLA and PET-G materials is characteristic by very high gloss (shiny).

Suggested printing parameters:
Hotend 225-245°C
Heated bed 50-60°C

Physical properties of the product:
Diameter of filament 1.75 mm / 2.85 mm
Dimensional tolerance of filament +/- 0.05 mm
Roundness of filament +/- 0.02 mm
Surface of the materia l High gloss
Shrinkage of the material Very low
Product weight 1.0 kg net, 1.36 kg gross
Spool - material Transparent policarbonate
Weight of the empty spool ~250 g
The diameter of the spool 200 mm
Width of spool ~70 mm
Diameter of mounting hole 52 mm
Packaging Printed cardboard
Package size ~205x205x80 mm
Vacuum packing Yes
Moisture absorber Yes

Physical properties of the material:
Specific Density 1.23 g/cm3 -
Glass Transition Temperature 80°C ASTM 3418
Moisture ? 0.3%

Osnovne karakteristike
Boja: zlatna
Vrsta: SILK 1.75mm


*Unatoč uloženom trudu da damo što bolji i točniji opis, slike i specifikacije, ne možemo garantirati da su svi navedeni podaci točni te ne odgovaramo za eventualne pogreške nastale u opisu proizvoda, slika ili specifikacija. Iste je potrebno provjeriti na stranicama proizvođača ili pošaljite upit našim djelatnicima da provjere.
Ukoliko na našoj stranici otkrijete neistinite odnosno neadekvatne informacije, molimo vas da nam to javite na prodaja[o]protis.hr

Za odabrani proizvod nije unesen niti jedan komentar.


Vezani proizvodi

Creality filament za 3D olovku, PCL Creality filament za 3D olovku, PCL
11,60 €
Nit za 3D printer, SILK 1,75mm, zlatna,1kg, Devil Design Nit za 3D printer, SILK 1,75mm, zlatna,1kg, Devil Design SILK filament za 3D printere Product description: SILK filament – a thermoplastic material in the form of fiber, used for 3D-printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. SILK is mix of PLA and PET-G materials is characteristic by very high gloss (shiny). Suggested printing parameters: Hotend 225-245°C Heated bed 50-60°C Physical properties of the product: Diameter of filament 1.75 mm / 2.85 mm Dimensional tolerance of filament +/- 0.05 mm Roundness of filament +/- 0.02 mm Surface of the materia l High gloss Shrinkage of the material Very low Product weight 1.0 kg net, 1.36 kg gross Spool - material Transparent policarbonate Weight of the empty spool ~250 g The diameter of the spool 200 mm Width of spool ~70 mm Diameter of mounting hole 52 mm Packaging Printed cardboard Package size ~205x205x80 mm Vacuum packing Yes Moisture absorber Yes Physical properties of the material: Specific Density 1.23 g/cm3 - Glass Transition Temperature 80°C ASTM 3418 Moisture ? 0.3%<table style="border:none;width:60%"></table>
0.00 0
Devil design
Devil design
26.70 EUR