Mill PA900WIFI3MP is a steel panel heating device with a built-in WiFi module that heats rooms up to 15 m2. It has a power of 900 W.
Description The Mill PA900WIFI3MP steel panel heating device with a built-in WiFi module heats rooms up to 15 m2 thanks to its 900 W power. The Mill Norway app allows you to control the heaters anywhere in the world with one click. You simply enter your normal schedule into the app and it will automatically adjust the temperature, making your life simple and comfortable. Freestanding legs can be ordered for this model, so it can also be placed upright.
Generation 3 Mill PA900WIFI3MP is the third generation model with many improvements in hardware and software compared to previous models such as:

A very simple Bluetooth connection allows it to automatically connect to your WiFi network, regardless of the type of router you have.
The first and only heater with a PID (proportional-integral-drain) thermostat. When the desired temperature is reached, the heater will maintain this temperature by reducing the power level, which means more stable heating with less temperature fluctuations. Power/Watt can also be set manually.
Predictable heating - The heater heats the room so that the desired temperature is reached at a certain time. The panel heating device has an advanced algorithm that learns how quickly/slowly the temperature in the room rises/falls. This way, it knows when to start heating to reach the desired temperature at the time you specified in the application.

Integrated WiFi The panel heating device has an integrated WiFi module. This means that no control panel or thermostat change is required. The heater connects directly to your WiFi network via Bluetooth. Make sure your WiFi router has enough capacity for the number of active devices connected to your home network. In 2024, it will be possible to integrate Mill WiFi3 with Google Assistant, Alexa, Homey and Apple HomeKit.
Additional product information:

The panel heating device can only be mounted horizontally. We recommend not hanging it too high for efficiency.
Mill does not have models for vertical assembly in its assortment.
It is suitable for use in the bathroom (IPX4).
The panel heating device is safe for children. The plate is heated only on top. No one will get burned.
The maximum surface temperature is about 50 degrees (depending on the model).
A wall bracket and screws are included.
WiFi models can also be managed manually on the device itself (if WiFi is turned off).
For a room where, for example, 1200 W is enough, we recommend using two 600 W models instead of one 1200 W model, as the heat will be better distributed throughout the room.
The cable is located on the right side of the device and can be routed between the wall bracket and the panel heating device.
The plug has a 90 degree angle, so the device cannot be placed over the socket.
There is about 3 cm of space between the wall and the panel.
The panel heating device must be freely suspended: 10 cm above and below it and 5 cm to the left and right.

Za odabrani proizvod nije definirana specifikacija.

Za odabrani proizvod nije unesen niti jedan komentar.