MILL panel convection radiator 250W steel IB250

Proizvod nije dobavljiv. Potražite neke druge modele koji su zamijenili MILL panel convection radiator 250W steel IB250

Proizvođač: Mill
Šifra: 1361121
Kataloški broj: IB250
Jamstvo: 24
Prosječna ocjena: Ocjena 0 0,00 | Glasova: 0
  Ocijeni ovaj proizvod


"Heating with style" Mill panel heater 250w white steel The Mill IB250 is the smallest model in the Mill Steel series. This toddler will keep small spaces, such as a small bedroom or hallway, heated. Its power is 250W. Aluminum heating element - high efficiency and low temperature on the front surface 100% quiet operation Precise thermostat - digitally registered Easy to use On / Off Temperature calibration function Elegant shape Technical specifications: Power: 250w Material heating element: Aluminum Frame material: steel Color: Mill white Cable: White, 80cm Cable orientation output: Right side IP classification: IPX4 (approved for bathroom use) Product size: (35.0 x 7.8 x 30.0 cm) Recommended room size: 2 - 5 m2 Buying instructions: Room size You will need to measure the size of the room, ie. floor area in square meters and ceiling height before deciding which model you need. If the space is too large, you may need more heaters to distribute the heat evenly between each source. In mild climates, use approx. 60-70 watts per square meter for calculation purposes and 70-85 watts per square meter for colder climates. A well-insulated house? The age and insulation of your home will also affect your heating needs. Less watts per square meter are needed for newer homes and homes with an influx of heat, while older and less well-insulated homes will need relatively more watts per square meter. Avoid the thermal bridge Although modern windows are impermeable, they are usually not insulated as well as walls. The air in them will cool quickly and sink towards the ground. This is called a thermal bridge, and can be avoided by installing a suitable radiator under each window. Go for more watts than you need Once you figure out how many watts you need, avoid buying a heater that just fits your needs. Buy such a product that gives you a little extra capacity so you don’t have to work at full power. The surface temperature of the heater will therefore be suitably lower. Also don't miss: Frequently Asked Questions (FAQ)

Dodatna Bonus jamstva za uređaj (opcija):
Zaštita PGR 5 godina (2+3) - 19,99 €
* jamstva su ponuđena automatiziranim odabirom, za informacije i sva pitanja obratite se prodavačima

Za odabrani proizvod nije definirana specifikacija.

Za odabrani proizvod nije unesen niti jedan komentar.


MILL panel convection radiator 250W steel IB250 MILL panel convection radiator 250W steel IB250 "Heating with style" Mill panel heater 250w white steel The Mill IB250 is the smallest model in the Mill Steel series. This toddler will keep small spaces, such as a small bedroom or hallway, heated. Its power is 250W. Aluminum heating element - high efficiency and low temperature on the front surface 100% quiet operation Precise thermostat - digitally registered Easy to use On / Off Temperature calibration function Elegant shape Technical specifications: Power: 250w Material heating element: Aluminum Frame material: steel Color: Mill white Cable: White, 80cm Cable orientation output: Right side IP classification: IPX4 (approved for bathroom use) Product size: (35.0 x 7.8 x 30.0 cm) Recommended room size: 2 - 5 m2 Buying instructions: Room size You will need to measure the size of the room, ie. floor area in square meters and ceiling height before deciding which model you need. If the space is too large, you may need more heaters to distribute the heat evenly between each source. In mild climates, use approx. 60-70 watts per square meter for calculation purposes and 70-85 watts per square meter for colder climates. A well-insulated house? The age and insulation of your home will also affect your heating needs. Less watts per square meter are needed for newer homes and homes with an influx of heat, while older and less well-insulated homes will need relatively more watts per square meter. Avoid the thermal bridge Although modern windows are impermeable, they are usually not insulated as well as walls. The air in them will cool quickly and sink towards the ground. This is called a thermal bridge, and can be avoided by installing a suitable radiator under each window. Go for more watts than you need Once you figure out how many watts you need, avoid buying a heater that just fits your needs. Buy such a product that gives you a little extra capacity so you don’t have to work at full power. The surface temperature of the heater will therefore be suitably lower. Also don't miss: Frequently Asked Questions (FAQ)<br><br><div><b>Dodatna Bonus jamstva za uređaj (opcija):</b><br><table style="border:none;width:60%"><tr style="line-height:0px"><td style="border:none"><a href="http://prot.is/aad77v">Zaštita PGR 5 godina (2+3)</a> - 19,99 €</td></tr></table><i>* jamstva su ponuđena automatiziranim odabirom, za informacije i sva pitanja obratite se prodavačima</i></div>
0.00 0
Mill
Mill
85.10 EUR