MILL convection radiator 2000W steel SG2000MEC
| Proizvođač: | Mill |
| Šifra: | 1361117 |
| Kataloški broj: | SG2000MEC |
| Jamstvo: | 24 |
| Raspoloživost: |
(Dobavljivo)
isporuka 2-5 radnih dana 
Navedeni rok isporuke je informativan te predstavlja uobičajeno vrijeme u kojem bi proizvod trebao biti spreman za isporuku, ukoliko u ovom trenutku zaprimimo uplatu.
*U navedeni rok se ne računaju subote i nedjelje, te državni praznici i ostali neradni dani. U slučaju slanja dostavnom službom nije uračunato vrijeme dostave. |
Prosječna ocjena: 
0,00
| Glasova:
0
|
| Ocijeni
ovaj proizvod
|
113,90 €
**kod nonSEPA transakcija naplaćujemo naknadu banke
već od 3,52 €/mjesečno
Odabrali ste prikaz cijena za gotovinsko plaćanje - prikaži MPC
"Heating with style" Mill convector radiator steel 2000w High efficiency of heat distribution - wire heating element Easy to use Elegantly finished shape "Tip-over" switch (radiator shuts off if it overturns) 3 heat setting options Technical specifications: Power: 2000W (750/1250/2000) Thermostat: Mechanical Fan: No. Heating element material: wire element Frame material: steel Legs: plastic Color: Mill white Cable: Black, 160cm Product size: (62.0 x 9.5 x 33.5 cm) Recommended room size: 5 - 30 m2 Buying instructions: Room size You will need to measure the size of the room, ie. floor area in square meters and ceiling height before deciding which model you need. If the space is too large, you may need more heaters to distribute the heat evenly between each source. In mild climates, use approx. 60-70 watts per square meter for calculation purposes and 70-85 watts per square meter for colder climates. A well-insulated house? The age and insulation of your home will also affect your heating needs. Less watts per square meter are needed for newer homes and homes with an influx of heat, while older and less well-insulated homes will need relatively more watts per square meter. Avoid the thermal bridge Although modern windows are impermeable, they are not usually insulated as well as walls. The air in them will cool quickly and sink towards the ground. This is called a thermal bridge, and can be avoided by installing a suitable radiator under each window. Go for more watts than you need Once you figure out how many watts you need, avoid buying a heater that just fits your needs. Buy such a product that gives you a little extra capacity so you don’t have to work at full power. The surface temperature of the heater will therefore be suitably lower. Manufacturer's Website: http://www.millheat.com/mill-floor/sg2000mec Also don't miss: Frequently Asked Questions (FAQ)
| Zaštita PGR 5 godina (2+3) - 20,00 € |
Za odabrani proizvod nije definirana specifikacija.
Za odabrani proizvod nije unesen niti jedan komentar.
