GTV luxomat, light sensor, 4800W, adjustable
| Proizvođač: | GTV |
| Šifra: | 1398361 |
| Kataloški broj: | CZ-CZ1000-00 |
| Jamstvo: | 24 |
| Raspoloživost: |
(Dobavljivo)
|
Prosječna ocjena: 
0,00
| Glasova:
0
|
| Ocijeni
ovaj proizvod
|
22,56 €
**kod nonSEPA transakcija naplaćujemo naknadu banke
-10% za gotovinu
već od 0,63 €/mjesečno
*Za prikaz cijena sa popustom (-10%) kliknite ovdje
The light sensor is used to automatically turn on the lights at dusk and off at dawn. This saves electricity. It consists of a sensor, which is protected in a waterproof housing, and an adjustable switch which can be used to adjust the sensitivity from 5 - 50 LUX. The sensor and the switch connect a 90cm cable. The switch is suitable for mounting on a DIN rail in an electrical cabinet. Installation: first make sure that there is no voltage in the mains determine the correct position of the sensor: it must be placed above the lamp to avoid poor performance drill a 13m diameter hole in the surface for the sensor gently insert the sensor head into the mounting hole connect the lamp (consumer) and power supply (mains) to the switch - the wiring diagram is given in the enclosed instructions after the installation, lower the el. current and check the operation of the sensor Technical specifications: Voltage: 220-240V AC / 50-60Hz Maximum permissible load: 4800W / 20A Switch dimensions: 66 x 36 x 90mm Weight: 130? Sensor hole mounting diameter: 13mm Sensor protection standard: IP54 Switch protection standard: IP20 Cable length from sensor: 90cm
Za odabrani proizvod nije definirana specifikacija.
Za odabrani proizvod nije unesen niti jedan komentar.
