GTV luxomat, light sensor, 4800W, adjustable


  large-image
GTV luxomat, light sensor, 4800W, adjustable
Kliknite na sliku za povećanje
thumb thumb
Najprodavanije
Najpopularnije
Proizvođač: GTV
Šifra: 1398361
Kataloški broj: CZ-CZ1000-00
Jamstvo: 24
Raspoloživost: Dobavljivo (Dobavljivo)
isporuka 2-3 radnih dana
Navedeni rok isporuke je informativan te predstavlja uobičajeno vrijeme u kojem bi proizvod trebao biti spreman za isporuku, ukoliko u ovom trenutku zaprimimo uplatu.

*U navedeni rok se ne računaju subote i nedjelje, te državni praznici i ostali neradni dani. U slučaju slanja dostavnom službom nije uračunato vrijeme dostave.
Prosječna ocjena: Ocjena 0 0,00 | Glasova: 0
  Ocijeni ovaj proizvod

20,30 €

Načini plaćanja online

Popust 10%
20,30 €
 
Transakcijski račun
Popust 9%
20,53 €
 
Kriptovalute
Popust 8%
20,75 €
 
Maestro, MasterCard, Visa
Popust 6%
21,20 €
 
Union, PBZ Maestro/Visa Inspire 2-6 rata
Popust 5%
21,43 €
 
Diners, ZABA Master/Visa 2-6 rata, ERSTE Master/Visa/Maestro 2-6 rata
Popust 4%
21,65 €
 
Diners 2-12 rata, PBZ Visa Inspire/Maestro 7-12 rata, PBZ Visa Premium 2-6 rata
Popust 3%
21,88 €
 
ZABA Master/Visa 7-12 rata
Popust 2%
22,10 €
 
ERSTE Master/Visa/Maestro 2-6 rata, PBZ Visa Premium 7-12 rata
Popust se ne obračunava
22,56 €
 
ZABA Master/Visa 13-24 rate, Diners 13-24 rate

Načini plaćanja u trgovini

Popust 10%
20,30 €
 
Novčanice, Transakcijski račun
Popust 9%
20,53 €
 
Maestro, MasterCard, Visa
Popust 7%
20,98 €
 
PBZ Maestro/Visa Inspire 2-6 rata
Popust 6%
21,20 €
 
RBA Master/Visa 2-12 rata
Popust 5%
21,43 €
 
Diners, ZABA kartice 2-6 rata, Diners 2-6 rata, ERSTE Maestro/Visa/Master 2-8 rata, PBZ Maestro/Visa Inspire 7-12 rata
Popust 4%
21,65 €
 
ZABA Master/Visa 7-12 rata, Diners 7-12 rata, PBZ Visa Premium 2-6 rata
Popust 3%
21,88 €
 
ERSTE Maestro/Visa/Master 9-12 rata
Popust 2%
22,10 €
 
Diners 13-24 rate, PBZ Visa Premium 7-12 rata
Popust se ne obračunava
22,56 €
 
ZABA Maestro/Visa 7-12 rata, ZABA Visa 13-24 rate, ZABA Master 13-36 rata, Diners 25-36 rata

*MBNET kartice (Maestro, Visa, Mastercard) kojima je moguće plaćanje na rate izdane od Slatinske banke, Istarske kreditne banke, Sberbanke, KentBank i Agram banke
**kod nonSEPA transakcija naplaćujemo naknadu banke

već od 0,63 €/mjesečno

Odabrali ste prikaz cijena za gotovinsko plaćanje - prikaži MPC



The light sensor is used to automatically turn on the lights at dusk and off at dawn. This saves electricity. It consists of a sensor, which is protected in a waterproof housing, and an adjustable switch which can be used to adjust the sensitivity from 5 - 50 LUX. The sensor and the switch connect a 90cm cable. The switch is suitable for mounting on a DIN rail in an electrical cabinet. Installation: first make sure that there is no voltage in the mains determine the correct position of the sensor: it must be placed above the lamp to avoid poor performance drill a 13m diameter hole in the surface for the sensor gently insert the sensor head into the mounting hole connect the lamp (consumer) and power supply (mains) to the switch - the wiring diagram is given in the enclosed instructions after the installation, lower the el. current and check the operation of the sensor Technical specifications: Voltage: 220-240V AC / 50-60Hz Maximum permissible load: 4800W / 20A Switch dimensions: 66 x 36 x 90mm Weight: 130? Sensor hole mounting diameter: 13mm Sensor protection standard: IP54 Switch protection standard: IP20 Cable length from sensor: 90cm

Za odabrani proizvod nije definirana specifikacija.

Za odabrani proizvod nije unesen niti jedan komentar.


GTV luxomat, light sensor, 4800W, adjustable GTV luxomat, light sensor, 4800W, adjustable The light sensor is used to automatically turn on the lights at dusk and off at dawn. This saves electricity. It consists of a sensor, which is protected in a waterproof housing, and an adjustable switch which can be used to adjust the sensitivity from 5 - 50 LUX. The sensor and the switch connect a 90cm cable. The switch is suitable for mounting on a DIN rail in an electrical cabinet. Installation: first make sure that there is no voltage in the mains determine the correct position of the sensor: it must be placed above the lamp to avoid poor performance drill a 13m diameter hole in the surface for the sensor gently insert the sensor head into the mounting hole connect the lamp (consumer) and power supply (mains) to the switch - the wiring diagram is given in the enclosed instructions after the installation, lower the el. current and check the operation of the sensor Technical specifications: Voltage: 220-240V AC / 50-60Hz Maximum permissible load: 4800W / 20A Switch dimensions: 66 x 36 x 90mm Weight: 130? Sensor hole mounting diameter: 13mm Sensor protection standard: IP54 Switch protection standard: IP20 Cable length from sensor: 90cm<table style="border:none;width:60%"></table>
0.00 0
GTV
GTV
20.30 EUR