Product information - LANCOOL 215 Mid Tower - ARGB, Tempered Glass, Black
With the LANCOOL 215, Lian Li offers a modern mid-tower with an attractive price-performance ratio. The PC case is based on a solid steel construction with a completely removable front cover. The tempered glass side panel provides a clear view into the case, so that the installed hardware can be admired. One dual and one triple radiator can be mounted to the top and front. With its excellent cooling properties the LANCOOL 215 allows high-performance gaming PCs to unleash their full potential.
The Lian Li LANCOOL 215 Mid Tower at a Glance:

High-quality mid-tower for motherboards up to E-ATX
One tempered glass side panel
Modular dust filters on the bottom and top
Suitable for graphics cards up to 370 mm in length
Accommodates one 360 mm and one 280 mm radiator
Including two large ARGB fans at the front and one black fan at the back
Illuminated logo with digitally addressable RGB lighting
Up to four drives such as SSDs and hard drives can be installed

LANCOOL 215: Mid Tower for Air and Water Cooling
This case supports all-in-one and custom liquid cooling alike. Those who rely on classic air cooling will really enjoy the LANCOOL 215, because it can accommodate a total of six fans. The front supports three fans, the top two, and the rear one fan. Alternatively, you can use two 140 mm fans on the front and top. The case comes with two 200 mm fans with digitally addressable RGB lighting and one black 120 mm fan pre-installed. CPU coolers with a maximum height of 166 mm are supported.
Lian Li has designed the LANCOOL 215 with water cooling in mind. The case supports one 360 or 280 mm radiator on the front and one 240 mm or 280 mm radiator on the top. In the front, a 360 mm radiator can be used together with the pre-installed 200 mm fans because the fans are mounted on the outside and the screws don?t interfere.
Stylish and Functional Design
The LANCOOL 215 was specifically designed for cooling high-performance hardware and offers extensive airflow: The front cover is largely made from an air-permeable mesh. The back, the top, and the bottom of the case are equipped with generous ventilation holes. A magnetic dust filter on the top and a sliding dust filter below the power supply keep the interior clean. The side panels are attached to the case using knurled screws, so that you can open the LANCOOL 215 without requiring any tools.
Plenty of Space for Powerful Hardware
The LANCOOL 215?s all-black interior is spacious, so that you can install high-performance hardware, such as up to 280 mm wide E-ATX motherboards and graphics cards up to 370 mm in length. On the back of the motherboard tray two 2.5-inch SSDs can be installed using the two included brackets.
Under the PSU cover the LANCOOL 215 provides another drive cage for one 3.5-inch drive as well as one drive in 3.5 or 2.5-inch format. The case can accommodate an ATX power supply with a depth of up to 210 mm. Two USB 3.0 type A ports and one combined 3.5 mm jack socket can be found on the I/O panel of the mid-tower. In addition, the RGB lighting can be controlled via a dedicated button.
Technical Details:

Dimensions: 215 x 482 x 462 mm (W x H x D)
Material: steel (chassis), tempered glass (left side panel), plastic
Colour: black
Form factor: E-ATX (up to 280 mm), ATX, Micro-ATX, Mini-ITX
Total fans possible:

3x 120 / 2x 140 / 2x 200 mm (front)
2x 120 / 2x 140 mm (top)
1x 120 mm (rear)


Fans pre-installed:

2x 200 mm ARGB (800 rpm, front)
1x 120 mm (1,100 rpm, rear)


Radiator mountings:

1x max. 360/280 mm (front)
1x max. 240/280 mm (top)


Filter: cover, power supply (removable)
Drive bays:

2x 2.5- inch (MB tray)
1x 3.5-inch (HDD cage)
1x 3.5/2.5-inch (on HDD cage)


Power supply unit: 1x standard ATX (optional)
Expansion slots: 7
I/O panel:

2x USB 3.0
1x 3.5 mm jack (4-pin, TRRS, audio in / out)


Maximum Graphics card: 370 mm
Maximum CPU cooler height: 166 mm
Maximum power supply length: 210 mm

Za odabrani proizvod nije unesen niti jedan komentar.