8th/9th Generation Intel® Core™i3/Pentium®/Celeron® Processor, Intel® Xeon® E-2100 Processor, Intel® Xeon® E-2200 Processor, Single Socket LGA-1151 (Socket H4) supported, CPU TDP supports Up to 95W TDP
Intel® C242 chipset
Up to 128GB DDR4 2666MHz ECC UDIMM; 4 DIMM slots
Expansion slots:
1 PCIe 3.0 x8 (in x16),
2 PCIe 3.0 x4 (in x8)
Dual GbE LAN with Intel® i210-AT
M.2 NGFF connector
6 SATA3 (6Gbps) ports;
RAID 0, 1, 5, 10
I/O: 1 VGA, 2 COM, 2 SuperDOM, and TPM header
Support up to 6 Cores

Product SKUs
MBD-X11SCL-F
Physical Stats
Form Factor

microATX

Dimension

9.6" x 9.6" (24.38cm x 24.38cm)

Processor
CPU

8th/9th Generation Intel® Core™ i3/Pentium®/Celeron® Processor, Intel® Xeon® E-2100 Processor, Intel® Xeon® E-2200 Processor
Single Socket LGA-1151 (Socket H4) supported, CPU TDP supports Up to 95W TDP

Core

Up to 6 cores, 12 threads

Note

BIOS version 1.0b or above is required to support Intel® Xeon® E-2200 and 9th Generation Intel® Core™ i3/Pentium®/Celeron® Processors

System Memory
Memory Capacity

4 DIMM slots
Up to 128GB Unbuffered ECC UDIMM, DDR4-2666MHz

Memory Type

2667/2400/2133MHz SDRAM 72-bit,

DIMM Sizes

4GB, 8GB, 16GB, 32GB

Memory Voltage

1.2V

Error Detection

Corrects single-bit errors

On-Board Devices
Chipset

Intel® C242

SATA

Intel® C242 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10

IPMI

ASPEED AST2500

Graphics

1 ASPEED AST2500 BMC port(s)

Network Controllers

Dual LAN with 1GbE with Intel® I210

Input / Output
USB

6 USB 2.0 port(s) (4 via header; 2 rear)
5 USB 3.1 Gen1 port(s) (2 via header; 1 type A; 2 rear type A)

Video Output

1 VGA port(s)

Serial Port

2 COM Port(s) (1 header; 1 rear)

DOM

2 SATA DOM (Disk on Module) power connector support

TPM

1 TPM Header

Expansion Slots
PCIe

1 PCIe 3.0 x8 (in x16 slot),
2 PCIe 3.0 x4 (in x8 slot)

M.2

M.2 Interface: 1 PCIe 3.0 x4
Form Factor: 2280/22110
Key: M-Key

System BIOS
BIOS Type

256MB UEFI

BIOS Features

ACPI 6.0
SMBIOS 2.7
Plug and Play (PnP)
RTC (Real Time Clock) Wakeup
UEFI 2.7
USB Keyboard support
PCI 3.0

Management
Software

SuperDoctor® 5, SUM, KVM with dedicated LAN, SSM, IPMI2.0

Power Configurations

Power-on mode for AC power recovery, ACPI Power Management

PC Health Monitoring
Voltage

VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 5 -fan status, +5V standby, +5V, +3.3V, +12V, Memory Voltages

LED

UID/Remote UID
CPU / System Overheat LED

Temperature

Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
PECI

FAN

5x 4-pin fan headers (up to 5 fans)
Thermal control tachometer fan connectors
PWM fan speed control
5 fans with tachometer status monitoring
Overheat LED indication

Other Features

WOL, UID, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ACPI power management

Operating Environment
Operating Temperature Range

0°C - 50°C (32°F - 122°F)

Non-Operating Temperature Range

-40°C - 70°C (-40°F - 158°F)

Operating Relative Humidity Range

8% - 90% (non-condensing)

Non Operating Relative Humidity Range

5% - 95% (non-condensing)

Za odabrani proizvod nije unesen niti jedan komentar.