CPU
- Support for Intel Core i7/Intel Core i5/Intel Core i3/Intel Pentium/Intel Celeron processors in the LGA1155 package
- L3 cache varies with CPU

CHIPSET
- Intel B75 Express Chipset

MEMORY
- 4× 1.5V DDR3 DIMM sockets supporting up to 32GB of system memory (due to Windows 32-bit operating system limitation, when more than 4GB of physical memory is installed, the actual memory size displayed will be less than 4GB)
- Dual channel memory architecture
- Support for DDR3 1600/1333/1066 MHz memory modules
* To support DDR3 1600 MHz, you must install an Intel 22nm CPU
- Support for non-ECC memory modules
- Support for Extreme Memory Profile (XMP) memory modules
* To support XMP memory, you must install an Intel 22nm CPU

ONBOARD GRAPHICS
- Integrated Graphics Processor:
1× D-Sub port
1× DVI-D port, supporting a maximum resolution of 1920×1200
* The DVI-D port does not support D-Sub connection by adapter
1× HDMI port, supporting a maximum resolution of 1920×1200

AUDIO
- Realtek ALC887 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver
- Support for S/PDIF Out

LAN
1× Realtek GbE LAN chip (10/100/1000 Mbit)

EXPANSION SLOTS
1× PCI Express x16 slot, running at x16 (PCIE x16)
(The PCIE x16 slot conforms to PCI Express 3.0 standard)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE x16 slot
* The PCI Express x16 slot supports up to PCI Express 2.0 standard when an Intel 32nm (Sandy Bridge) CPU is installed
1× PCI Express x16 slot, running at x4 (PCIE x4)
(The PCIEX4 slot conforms to PCI Express 2.0 standard)
2× PCI slots

MULTI-GRAPHICS TECHNOLOGY
- Support for AMD CrossFireX technology
* The PCIE x16 slot operates at up to x4 mode when AMD CrossFireX is enabled

STORAGE INTERFACE
Chipset:
1× SATA 6Gb/s connector (SATA3 0) supporting up to 1 SATA 6Gb/s device
5× SATA 3Gb/s connectors (SATA2 1-5) supporting up to 5 SATA 3Gb/s devices

USB
Chipset:
* Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
* Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB headers)
(In Windows XP, the Intel USB 3.0 ports can support up to USB 2.0 transfer speed)

INTERNAL I/O CONNECTORS
1× 24-pin ATX main power connector
1× 4-pin ATX 12V power connector
1× SATA 6Gb/s connector
5× SATA 3Gb/s connectors
1× CPU fan header
1× system fan header
1× front panel header
1× front panel audio header
1× S/PDIF Out header
1× USB 3.0/2.0 header
2× USB 2.0/1.1 headers
1× serial port header
1× parallel port
1× Trusted Platform Module (TPM) header
1× Clear CMOS jumper

BACK PANEL CONNECTORS
1× PS/2 keyboard/mouse port
1× D-Sub port
1× DVI-D port
1× HDMI port
2× USB 3.0/2.0 ports
4× USB 2.0/1.1 ports
1× RJ-45 port
3× audio jacks (Line In/Line Out/Microphone)

I/O CONTROLLER
- iTE I/O Controller Chip

H/W MONITORING
- System voltage detection
- CPU/System temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install

BIOS
- 2× 64 Mbit flash
- Use of licensed AMI EFI BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

UNIQUE FEATURES
- Support for @BIOS
- Support for Q-Flash
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for Auto Green
- Support for ON/OFF Charge
- Support for Q-Share
- Support for LAN Optimizer (Intelligent optimization network management tool)

OPERATING SYSTEM
- Support for Microsoft Windows 7/XP

FORM FACTOR
- Micro ATX Form Factor (24.4×22.0 cm)